Description
The 6-port Universal Data Interface Card (6UDTEA) card for Loop-O9500R series is designed to transport DS0 and sub-rate signals. Both SYNC and ASYNC data of X.21, RS449, RS422, RS232, V.35, V.36, EIA530 can be transported on the four ports (i.e. port 1 to 4) of DB44 connector. ASYNC RS232 can be transported on the additional ports (i.e. port 5 and 6) of RJ48 connector. Per-port software configuration is available.
Five modes are designed to provide different needs of DTE signal transportation.
In Mode 1, all 6 ports can be MUXed (V.110) into one 64K channel. When the card is set to NON-MUX in Mode 1, asynchronous data rate per channel/port can be up to 38.4 Kbps, and synchronous data rate per channel/port can be up to 64 Kbps.
In Mode 2, each of the four ports is able to transport N x 64K signals, where N=1~32
In Mode 3, each of port 1~3 is able to transport N x 64K signals, where N=1~32, while port 4 is able to transport N x 64K signals, where N=1~20. Mode 3 also supports oversampling 64 Kbps ASYNC RS232 on port 5 and 6.
In Mode 4, Clock Pass Through is available for port 1 to 4.
In Mode 5, each of the four ports is able to transport N x 64K signals, where N=1~32. It can also support local and remote loopback.
With 6UDTEA card and high bandwidth SDH/SONET/PTN uplink capacity of O9500R, DTE signals can then be hauled throughout networks to remote sites with minimal delay.
Features
- Supports X.21/RS449/RS422/RS232/V.35/V.36/EIA530
- Supports both synchronous and asynchronous data
- Port 1 to 4: two DB44 connectors
- Port 5 to 6: two RJ48 connectors
- Four software configurable modes
- MODE 1:
- Supports MUX/NON-MUX Mode for SYNC/ASYNC data
- Port 1 to 4: RS232/RS422/X.21, SYNC/ASYNC 64kbps and sub-rate with V.110 encoding
- Port 5 to 6: RS232 for 64kbps and sub-rate, ASYNC only
- MODE 2:
- Port 1 to 4: X.21/RS449/RS422/RS232/V.35/V.36/EIA530 SYNC N*64k (N=1~32)
- Port 5 to 6: Disabled
- MODE 3:
- Port 1 to 3: X.21/RS449/RS422/RS232/V.35/V.36/EIA530 SYNC N*64k, (N=1~32).
- Port 4: X.21/RS449/RS422/RS232/V.35/V.36/EIA530 SYNC, N*64k, (N=1~20).
- Port 5 to 6: RS232 N*64k (N=1~6) oversampling for ASYNC data.
- MODE 4: Clock Pass Through
- Port 1 to 4: RS232/RS422/X.21/V.35/V.36/EIA530 SYNC 38.4K and subrate
- Port 5 to 6: Disabled
- MODE 5: N*64K with Local and Remote Loopback
- Port 1 to 4: X.21/RS449/RS232/RS422/V.35/V.36/EIA530 SYNC, N*64k (N=1~32)
- Port 5 to 6: Disable
- Local and Remote Loopback with BERT, supporting V.54
