The 6RS232A card for Loop-O9500R has 6 interface ports. For the RJ version, 6 RJ48 connectors are available in Asynchronous mode. For the DB version, 2 DB44 connectors are available in Asynchronous and Synchronous modes, and provide 3 ports each. Two cables are included. Each cable converts from DB44 connector to two DB25 and one DB9 connectors.
For Asynchronous signals, each of the 6 asynchronous ports up to 38.4 Kb/s rate, is assigned a separate 64 Kb/s channel in independent mode. Moreover, each port can be used in either NON-MUX (independent) mode or MUX mode for Sync/Async applications.
The 6RS232A card is designed to allow user to transport subrate signals on a 64Kbps channel and the data will fill into the bit stream. Users are able to have customized MUX configuration as wishes. Also, all 6 ports can be MUXed; only port 1 is in MUX mode at all time, and all the configured MUX ports will be merged to port 1. Furthermore, there will be solely one MUX group and all Mux port kbits cannot be larger than 64kbits.
- 6 RS232 ports per card
- Supports V.110 protocol
- Data rate
- Sync: 0.6K, 1.2K, 2.4K, 4.8K, 9.6K, 19.2K, 38.4K, 48K, 64K
- Async: 0.6K, 1.2K, 2.4K, 4.8K, 9.6K, 19.2K, 38.4K
- Mode: MUX or NON-MUX (independent) mode
- RTS remote management
- Two card types:
- 6 RJ48 only card: 6 ports RS232 Async
- 2 DB44 card: Up to 4 ports RS232 Sync/Async + 2 ports RS232 Async