.png "IP6704A-3")
.png "IP6704A-1")
.png "IP6704A-2")
.png "IP6704A-4")
.png/IP6702-3 (1)_120x0.png)
.png/IP6704A-1 (1)_120x0.png)
.png/IP6704A-2 (1)_120x0.png)
.png/IP6704A-4 (1)_120x0.png)
Description
The Loop-IP6704A TDMoEthernet is an ideal solution for service providers to build their network and achieve a fast return on investment. Currently, providers need to transport both TDM and Packet traffic. These can be achieved using the E1/FE1, T1/FT1 and Gigabit Ethernet tributary ports of the IP6704A.
The Loop-IP6704A device allows operators to transport and time-slot-cross-connect E1 / FE1, T1 / FT1, E&M, X.21, RS232 V.35, EIA530, QFXSA or QFXOA, G.703, C37.94 data streams with timing information over PSN (Packet Switched Network) via Pseudowire protocols - SAToP / CESoPSN / MEF8. Another IP6704A converts the received packet stream back to the original E1 / FE1, T1 / FT1, E&M, X.21, RS232 V.35, EIA530, QFXSA or QFXOA, G.703, C37.94 data streams with original timing information. This allows a cost-effective migration from existing legacy TDM networks to the existing PSN.
For transport of TDM signals, the Jitter and Wander adhere to G.823/G.824 Traffic Interface.
Features
Mechanical and Electrical
- 1U height,1/2 19” rack width. ANSI shelf
- Power module
- Up to two DC plug-in modules or Hybrid 100 to 240 Vac and -48 Vdc (-36 to -72 Vdc) coexist fixed power supply
Ethernet Interface
- Four Ethernet ports for WAN or LAN port by software configuration
- Two Gigabit Ethernet (GbE) with 2 SFP housing
- Two 10/100/1000 BaseT Ethernet
- IEEE 802.3ad Ethernet Link Aggregation*
Timing
- Internal/Line
- Adaptive Clock Recovery for TDM Pseudowires
- Jitter and Wander conforms to G.823/824 for Traffic Interface
- SyncE
Management
- SNMPv1/v3
- DB-9 Console port with VT-100 menu
- Telnet and SSH v2
- iNET GUI
L2 Switching
- VLAN
- Maximum 4094 concurrent VLAN Groups
- Support C-VLAN/S-VLAN tag adding and removing on Pseudowire
- Support 802.1q Port-Based VLAN on Ethernet/SNMP Port
- Support 802.1d MAC Learning
- Support 803.3x Flow control* on input ports
- Support 802.1D STP, 802.1w RSTP, 802.1s MSTP*
- Support IGMP Snoopingv2 (RFC 2236)*
- Jumbo frame up to 10k bytes
- IS-IS Packet transparency*
Tributary Interface
- Up to four T1/E1 ports per module with a max of 2 modules plus 2 T1/E1 on main board giving a maximum capacity of 10 T1/E1
- Up to two single-port DTE modules :
- X.21 or RS232/V.24 or V.35 or EIA530
- Up to two voice modules:
- Four ports E&M
- Four ports FXSA
- Four ports FXOA
- Up to two single-port modules for power utilities
- G.703
- C37.94
OAM
- E1/T1 OAM
- RFC-2495: LOS, LOF, LCV*, RAI, AIS, FEBE*, BES, DM*, ES, SES, UAS and LOMF*
QoS
- Egress Rate Limiting per Ethernet port with 64kbps/1Mbps/10Mbps granularity
- Ethernet Network Level:
- 3-bit Priority Code Point – PCP field within 802.1P/802.1Q Ethernet frame – CoS
- 4 priority queues per port
- IP Network Level
- 6-bit DiffServ Code Point -DSCP field – ToS
- Scheduling Algorithm
- Strict Priority (SP)
- Weighted Round Robin (WRR)
Pseudowires
- TDM Pseudowires
- Up to 16 concurrent pseudowires
- 1 E1/T1 can support up to 16 pseudowires
- Pseudowire protocols
- SAToP
- CESoPSN
- MEF-8 (CESoETH)
- Packet Delay Variation Compensation Depth up to 256 ms
Diagnostics
- E1/T1 BERT & Loopback
Cross connect capability (IP6704A-DACS only)
- Support full non-blocking DS0 cross-connect matrix between TDM interfaces and TDMoE Pseudowires
- Suitable for DACS (Digital Access Cross-Connect System) and ADCB (Add/Drop Channel Bank) applications
- Auto A-law/μ-law conversion
*Future Option
IP6704A Point-to-Point Application
IP6704A on VPN Network
IP6704A-DACS Radio/SDH/SONET System Application
IP6704A Radio/SDH/SONET System Application
