| |
 |
 Loop-E1200 FE1 CSU/DSU |
The Loop-E1200 FE1 CSU/DSU series supports HDB3 (High Density Bipolar 3) coding and provides continuous error checking, performance polling, and in-service diagnostics.
|
|
|
 |
Loop-V4200 Series - QFXS/ QFXO Interface Card |
They allow voice frequency interfaces to be multiplexed as a 64 Kbps DS0 signal onto a digital network. The QFXO provides connections from four telephone lines, either from a central office or from a PBX.
|
|
|
 |
Loop-V4100 UMAP |
Loop V4100
ˇDYBOX available for 21 E1 interface card hardware protection
ˇDIn-band management, out-band management
|
|
|
 |
Loop-E1500 (Rack Card) |
Loop Telecom's Loop-E 1500 FE1 CSU/DSU product series provide an economic solution to E1 network access cost, when only a partial of 31 DS0 channels is needed.
|
|
|
 |
Loop-AM3440-C Access DCS-MUX |
| The Loop-AM3440-C is one of Loop-AM3440 Access DCS-MUXs series which provides max. 72 Mbps cross-connect backplane capacity. With 4 mini slots and 5 single slots of AM3440-C, it combines various digital access interfaces into E1 or T1 lines for convenient transport and switching.
The Loop-AM344 |
|
|
 |
Loop-H3300R G.SHDSL |
| The Loop-H3300 provides high speed digital transport over twisted copper pairs using 16PAM technology. Versatility of this series comes from a choice of digital interfaces and a choice of data rates, with the lower data rates applicable to longer reaches. Repeaters are available for extending the re |
|
|
 |
Loop-IP6100 High Speed Ethernet Access |
Loop-IP6100 High Speed Ethernet Access provides connectivity from high speed 100 Base-T full duplex Ethernet to either DS3 or E3 networks. Loop-IP 6100 also support alarm relay.
|
|
|
 |
Loop-V4200-9 IAD |
The Loop-V4200-9 supports local control and diagnostics by using a 2-line by 40-character LCD display and keypads on the front panel, or by using a VT-100 terminal connected to the console port.
|
|
|
 |
Loop-V4300 Mini DACS E1/T1 Converter |
Loop-V 4300 Mini DACS E1/T1 converter provides both DS0 and n x 64 Kbps cross-connect between any T1 and E1 ports and E1 to T1 format conversion functions.
|
|
|
 |
LoopView |
| LoopView is a software product that provides a GUI (graphical user interface) for the management of a communications network containing Loop Telecom products. Because it runs on PC/Windows 7/XP/2003/ 2008R2 users can have a GUI management system using a low-cost and popular platform. p>
Th |
|
|
|
| |