IP6704A TDMoEthernet
 The Loop-IP6704A device allows operators to transport E1 ,T1*, E&M, X.21, or RS232 data stream with timing information over PSN (Packet Switched Network) via Pseudowire Protocol – SAToP/CESoPSN/MEF8*.
Features
 Mechanical and Electrical
– 1U height,1/2 19” rack width. ANSI shelf.
– Power module
  • Up to two DC plug-in modules or Hybrid 100 to 240 Vac and -48 Vdc (-36 to -72 Vdc) coexist fixed power supply or Single 125Vdc power plug-in module*
– Temperature range from 0° to 55°C
 
Ethernet Interface
– Four Ethernet ports for WAN port assignment
  • Two Gigabit Ethernet (GbE) with 2 SFP housing
  • Two 10/100/1000 BaseT Ethernet
– IEEE 802.3ad Ethernet Link Aggregation*
 
Timing
– Internal/Line
– Adaptive Clock Recovery for TDM Pseudowires
  • Jitter and Wander conforms to G.823/824 for Traffic Interface
Management
– SNMPv1/v3
– DB-9 Console port with VT-100 menu
– Telnet and SSHv1*/v2*
– iNET GUI
 
Tributary Interface
- Up to two E1/T1* ports or four E1/T1* ports.
- Up to two single port DTE modules:
  • X.21 or RS232/V.24 or V.35* or EIA530*
- Up to 2 voice modules:
  • Four ports E&M
  • Four ports FXS*
  • Four ports FXO*
  • Four ports Magneto*
  • Supports Echo Cancellation*
OAM
– E1/T1 OAM
  • RFC-2495: LOS, LOF, LCV*, RAI, AIS, FEBE*, BES, DM*, ES, SES, UAS and LOMF*
QoS
– Ingress Rate Limiting* per Ethernet port with 64kbps/1Mbps/10Mbps granularity
– Ethernet Network Level:
  • 3-bit Priority Code Point – PCP field within 802.1P/802.1Q Ethernet frame – CoS
  • 4 priority queues per port
– IP Network Level:
  • 6-bit DiffServ Code Point -DSCP field – ToS
– Scheduling Algorithm
  • Strict Priority (SP)
  • Weighted Round Robin (WRR)
L2 Switching
– VLAN
  • Maximum 4094 concurrent VLAN Groups
  • Support C-VLAN/S-VLAN tag adding and removing on Pseudowire
  • Support 802.1q Port-Based VLAN on Ethernet/SNMP Port
  • Support Q-in-Q
– Support 802.1d MAC Learning
– Support 803.3x Flow control* on input ports
– Support 802.1D STP*, 802.1w RSTP*, 802.1s MSTP*
– Support IGMP Snoopingv2 (RFC 2236)*
– Jumbo frame up to 10k bytes
– IS-IS Packet transparency*
 
Pseudowires
– TDM Pseudowires
  • Up to 16 concurrent pseudowires
  • Pseudowire protocols
  1. SAToP
  2. CESoPSN
  3. MEF-8 (CESoETH)*
  • Packet Delay Variation Compensation Depth up to 256 ms
Diagnostics
– E1/T1* BERT & Loopback
 
 
* Future option
 
Description
 The Loop-IP6704A TDMoEthernet is an ideal solution for service providers to build their network and achieve a fast return on investment. Currently providers need to transport both TDM and Packet traffic. These can be achieved using the E1/T1* and Gigabit Ethernet tributary ports of the IP6704A.
 
The Loop-IP6704A device allows operators to transport E1 ,T1*, E&M, X.21, or RS232 data stream with timing information over PSN (Packet Switched Network) via Pseudowire Protocol – SAToP/CESoPSN/MEF8*. Another IP6704A converts the received packet stream back to original E1, T1*, E&M, X.21 or RS232 data stream with original timing information. This allows cost-effective migration from existing legacy TDM networks to existing PSN.
 
For transport of TDM signals, the Jitter and Wander adheres to G.823/G.824 Traffic Interface.
 
* Future option
 
 
Applications
 
Downloads
File Type File Name Description
Brochure IP6704A-v4-B Members only