手機選單
search
6-port-Universal-Data-DTE-6UDTEA
  • 6-port-Universal-Data-DTE-6UDTEA

6-port Universal Data Interface Card (6UDTEA) for O9500R

The 6UDTEA card for Loop-O9500, Loop-O9550-A/C, and the Loop-AM3440 series has 6 interface ports. 2*RJ48 connectors provide ASYNC RS232 and 2*DB44 connectors provide 2 ports each, and can be software per-port configured for X.21/RS232/RS422.

  • Features
  • Applications
  • Downloads

The 6-port Universal Data Interface Card (6UDTEA) card for Loop-O9500R series is designed to transport DS0 and sub-rate signals. Both SYNC and ASYNC data of X.21, RS449, RS422, RS232, V.35, V.36, EIA530 can be transported on the four ports (i.e. port 1 to 4) of DB44 connector. ASYNC RS232 can be transported on the additional ports (i.e. port 5 and 6) of RJ48 connector. Per-port software configuration is available.

Four modes are designed to provide different needs of DTE signal transportation.

In Mode 1, all 6 ports can be MUXed (V.110) into one 64K channel. When the card is set to NON-MUX in Mode 1, asynchronous data rate per channel/port can be up to 38.4 Kbps, and synchronous data rate per channel/port can be up to 64 Kbps.

In Mode 2, each of the four ports is able to transport N x 64K signals, where N=1~32

In Mode 3, each of port 1~3 is able to transport N x 64K signals, where N=1~32, while port 4 is able to transport N x 64K signals, where N=1~20. Mode 3 also supports oversampling 64 Kbps ASYNC RS232 on port 5 and 6.

In Mode 4, Clock Pass Through is available for port 1 to 4.

With 6UDTEA card and high bandwidth SDH/SONET/PTN uplink capacity of O9500R, DTE signals can then be hauled throughout networks to remote sites with minimal delay.

  • Supports X.21/RS449/RS422/RS232/V.35/V.36/EIA530
  • Supports both synchronous and asynchronous data
  • Port 1 to 4: two DB44 connectors
  • Port 5 to 6: two RJ48 connectors
  • Four software configurable modes
  • MODE 1:
    • Supports MUX/NON-MUX Mode for SYNC/ASYNC data
    • Port 1 to 4: RS232/RS422/X.21, SYNC/ASYNC 64kbps and sub-rate with V.110 encoding
    • Port 5 to 6: RS232 for 64kbps and sub-rate, ASYNC only
  • MODE 2:
    • Port 1 to 4: X.21/RS449/RS422/RS232/V.35/V.36/EIA530 SYNC N*64k (N=1~32)
    • Port 5 to 6: Disabled
  • MODE 3:
    • Port 1 to 3: X.21/RS449/RS422/RS232/V.35/V.36/EIA530 SYNC N*64k, (N=1~32).
    • Port 4: X.21/RS449/RS422/RS232/V.35/V.36/EIA530 SYNC, N*64k, (N=1~20).
    • Port 5 to 6: RS232 N*64k (N=1~6) oversampling for ASYNC data.
  • MODE 4: Clock Pass Through
    • Port 1 to 4: RS232/RS422/X.21/V.35/V.36/EIA530 SYNC 38.4K and subrate
    • Port 5 to 6: Disabled

Downloads